Follow Wranglerstar on Facebook for exclusive videos, pictures, & updates.
http://www.facebook.com/pages/Wrangle...
Episode 11 of the DIY Survival Cabin For Economic Collapse will cover fitting all four corner joints of the sill plate timbers. Working with big timbers is hard and a tight fitting joint takes a lot of time and concentration. The tools I'm using today are two Robert Sorby timber framing chisels. The large "slick" is very old and was givin to me by my old neighbor Hank. I sharpen my timber framing chisels each day before I start working on the frame. If you keep your tools sharp you work will go much smoother. The best sharpening stone I have found for small hand tools like chisels and axes is a 4" two sided stone manufactured by Norton. The two sided stone is more versatile with it's coarse and fine sides. Be sure to apply a few drops of Kerosene or Diesel to the stone. This will prevent the stone from becoming fouled with metal particles. You may also notice I'm using two mallets. The large orange mallet is from Harbor Freight and is shot filled. Filling a mallet head with shot prevents it from bouncing when you strike an object. The smaller red hand mallet is nice for working with the chisels because it does not glance off the wooden handles and is comfortable in the hand. You may have noticed the steel rods I inserted into the corner joints. This is to prevent the frame from coming out of square once I set each corner. I often get asked how are you going to move that cabin once it's assembled? The cabin needs to be assembled in the shop to be sure all the joints fit properly together. Once everything is fitted the pieces will be taken apart and installed at the homestead site. Once the frame is fitted it will be permanently fastened together using 1" oak dowel pins.
Building A Timber Frame Cabin Episode 11 | |
| 1,172 Likes | 1,172 Dislikes |
| 105,685 views views | 1,167,908 followers |
| Education | Upload TimePublished on 22 Sep 2012 |
Không có nhận xét nào:
Đăng nhận xét